We rigged up the same PA system as the first week but this time we added in a keyboard, vocoder, a guitar and a set of drums. We used a DI box for the keyboard and the guitar. We then used the mixing desk to make the level of all of the instruments even. We did this by adjusting the gain on desk until all of the instruments complimented each other. We sometimes had to single out each instrument in order to hear it properly, to do that we would solo the channel of the instrument.
Add notes on time: quantify how long everything takes
write how can you maximize your time
Royal Opera House Design Challenge
For the Royal Opera House Design Challenge I have decided to do Marketing Strategy and Design. My idea is to do a virtual tour of the Royal ...
-
We started learning about how to rig a PA system. We used an SM58 microphone, connected it into a pre-amp using an XLR cable, then we used a... -
We spent a couple of days repatching the theatre as the magic sheet didn't correspond to the channels that lights the were plugged into....
-
During this lesson we looked at theatre during the Victorian Age as a way to do some research for the Christmas play that we're doing - ...
No comments:
Post a Comment